FIU Discovery

Heat and Mass Transfer Correlations for Staggered Nanoporous Membrane Tubes in Flue Gas Crossflow.  JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME.  144.

Thermal performance evaluation of a microchannel with different porous media insert configurations.  INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW.  32:1488-1516.

Power-law fluid micromixing enhancement using surface acoustic waves.  JOURNAL OF MOLECULAR LIQUIDS.  347.

Optimization and Inverse Design of Floor Tile Airflow Distributions in Data Centers Using Response Surface Method.  JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME.  144.

Computational Simulation and Analysis of Major Control Parameters of Time-Dependent Photovoltaic/Thermal Collectors.  JOURNAL OF SOLAR ENERGY ENGINEERING-TRANSACTIONS OF THE ASME.  143.

Combined effects of a microchannel with porous media and transverse vortex generators (TVG) on convective heat transfer performance.  INTERNATIONAL JOURNAL OF THERMAL SCIENCES.  166.

Numerical modeling of fractional viscoelastic non-Newtonian fluids over a backward facing step - Buoyancy driven flow and heat transfer

Optimization and heat transfer correlations development of zigzag channel printed circuit heat exchangers with helium fluids at high temperature.  INTERNATIONAL JOURNAL OF THERMAL SCIENCES.  160.

Microstructure and electrical property of tantalum oxynitride thin films prepared using high-power impulse reactive magnetron sputtering.  JAPANESE JOURNAL OF APPLIED PHYSICS.  59:116502.

CFD-based response surface methodology for rapid thermal simulation and optimal design of data centers.  ADVANCES IN BUILDING ENERGY RESEARCH.  14:471-493.

Assessment of the design effects on the structural performance of the Printed Circuit Heat Exchanger under very high temperature condition.  NUCLEAR ENGINEERING AND DESIGN.  365.

TURBULENT FORCED CONVECTION NANOFLUID FLOW OVER AN INCLINED FORWARD-FACING STEP.  HEAT TRANSFER RESEARCH.  51:1221-1240.

Assessment of Iron Oxide (III)-Therminol 66 Nanofluid as a Novel Working Fluid in a Convective Radiator Heating System for Buildings.  ENERGIES.  12.

Numerical Simulation and Validation of Thermoeletric Generator Based Self-Cooling System with Airflow.  ENERGIES.  12.

An evaluation of turbulence and tile models at server rack level for data centers.  BUILDING AND ENVIRONMENT.  155:421-435.

Numerical modeling and analysis of Transport Membrane Condensers for waste heat and water recovery from flue gas.  INTERNATIONAL JOURNAL OF THERMAL SCIENCES.  136:96-106.

Optimization of the energy supply in the plastics industry to reduce the primary energy demand.  JOURNAL OF CLEANER PRODUCTION.  192:790-800.

AHP-based design method of a lightweight, portable and flexible air-based PV-T module for UAV shelter hangars.  RENEWABLE ENERGY.  123:767-780.

Direct numerical simulation and analytical modeling of electrically induced multiphase flow.  INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES.  142:397-406.

Modeling and simulation of cross-flow transport membrane condenser heat exchangers.  INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER.  95:92-97.

Numerical study of heat transfer enhancement using transverse microchannels in a heat sink.  INTERNATIONAL JOURNAL OF THERMAL SCIENCES.  125:89-100.

Simulation of deformation and fragmentation of a falling drop under electric field.  POWDER TECHNOLOGY.  325:301-308.

Reduced order modeling of a data center model with multi-Parameters.  ENERGY AND BUILDINGS.  136:86-99.

A heat transfer and friction factor correlation for low air-side Reynolds number applications of compact heat exchangers (1535-RP).  SCIENCE AND TECHNOLOGY FOR THE BUILT ENVIRONMENT.  23:192-210.

Experimental investigation on heat driven self-cooling application based on thermoelectric system.  INTERNATIONAL JOURNAL OF THERMAL SCIENCES.  109:309-322.

Modeling quenching distance and flame propagation speed through an iron dust cloud with spatially random distribution of particles.  JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES.  43:138-146.

Identifying, Prioritizing, Measuring and Verifying Clean Energy Solutions for Korea's Public Building Renewable Energy Obligation Policy

Numerical simulation of integrated liquid cooling and thermoelectric generation for self-cooling of electronic devices.  INTERNATIONAL JOURNAL OF THERMAL SCIENCES.  94:193-203.

Nanoporous membrane tube condensing heat transfer enhancement study.  INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER.  84:456-462.

Numerical Simulation and Parametric Study of Heat-Driven Self-Cooling of Electronic Devices.  JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS.  7.

Prediction of hydrodynamic entrance length for single and two-phase flow in helical coils.  CHEMICAL ENGINEERING AND PROCESSING.  86:9-21.

Fault diagnosis of a vapor compression refrigeration system with hermetic reciprocating compressor based on p-h diagram.  INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID.  45:44-54.

Reducing energy demand in production environment requiring refrigeration-A localized climatization approach.  HVAC&R RESEARCH.  20:628-642.

A multi-zone building energy simulation of a data center model with hot and cold aisles.  ENERGY AND BUILDINGS.  77:364-376.

Secondary reactions of turbulent reacting flows over a film-cooled surface.  INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER.  55:93-101.

RANS simulation of methane-air burner using local extinction approach within eddy dissipation concept by OpenFOAM.  INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER.  54:96-102.

CO2 and thermal gradient based demand-driven stratified ventilation - Experimental and simulation study.  HVAC&R RESEARCH.  19:676-692.

Intelligent Sensor Placement for Hot Server Detection in Data Centers.  IEEE TRANSACTIONS ON PARALLEL AND DISTRIBUTED SYSTEMS.  24:1577-1588.

Numerical modeling and simulation of condensation heat transfer of a flue gas in a bundle of transport membrane tubes.  INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER.  60:41-50.

A Numerical Study of Both Internal and External Two-Phase Flows of a Rotating Disk Atomizer.  DRYING TECHNOLOGY.  31:605-613.

Erratum on "Heat Release in Turbine Cooling I: Experimental and Computational Comparison of Three Geometries"

FULLY COUPLED 3-D CONJUGATE HEAT TRANSFER ALGORITHM FOR BOREHOLE HEAT EXCHANGER PERFORMANCE PREDICTION

Application of Lattice Boltzmann Method in Indoor Airflow Simulation.  HVAC&R RESEARCH.  16:825-841.

Reacting Turbulent Flow and Thermal Field in a Channel With Inclined Bluff Body Flame Holders.  JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME.  132.

Experimental Study of Bubble Growth and Departure at the Tip of Capillary Tubes with Various Wettabilities in a Stagnant Liquid

Visual Experiments of Bubble Growth and Departure at the Tip of Inclined Capillary Tubes in a Stagnant Liquid

A computational DFT analysis of OH chemisorption on catalytic Pt(111) nanoparticles.  JOURNAL OF NANOPARTICLE RESEARCH.  12:865-876.

A computational study of gas flow in a De-Laval micronozzle at different throat diameters.  INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS.  59:1203-1216.

Penetration height correlations for non-aerated and aerated transverse liquid jets in supersonic cross flow.  EXPERIMENTS IN FLUIDS.  46:121-129.

A numerical study of developing slurry flow in the entrance region of a horizontal pipe.  COMPUTERS & FLUIDS.  37:965-974.

Room Temperature Nanocatalytic Reaction and Its Application in Nanoscale Heat Engine

Measurements of soot volume fraction in pulsed diffusion flame by laser induced incandescence.  EXPERIMENTS IN FLUIDS.  44:137-144.

Condensation heat transfer and pressure drop of R134a in annular helicoidal pipe at different orientations.  INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER.  50:4256-4264.

Drag reduction by gas injection into turbulent boundary layer: Density ratio effect.  INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW.  27:436-444.

Investigation of double-diffusive convection during the solidification of a binary mixture (NH₄Cl-H₂O) in a trapezoidal cavity.  EXPERIMENTS IN FLUIDS.  40:918-927.

Dispersion modeling of PM10 released during decontamination activities.  JOURNAL OF HAZARDOUS MATERIALS.  132:58-67.

Assessments of Bubble Dynamics Model and Influential Parameters in Microbubble Drag Reduction

Numerical modeling of three-dimensional compressible gas flow in microchannnels.  JOURNAL OF MICROMECHANICS AND MICROENGINEERING.  16:292-302.

Active Control Strategies to Optimize Supersonic Fuel-Air Mixing for Combustion Associated with Fully Modulated Transverse Jet in Cross Flow

Condensation heat transfer and pressure drop characteristics of R-134a in an annular helical pipe.  INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER.  32:1307-1316.

CONDENSATION HEAT TRANSFER OF R-134a IN A HELICAL PIPE.  JOURNAL OF HYDRODYNAMICS.  16:144-150.

Double-species slurry flow in a horizontal pipeline.  JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME.  126:125-132.

Double-diffusive convection during solidification of a metal analog system (NH₄Cl-H₂O) in a differentially heated cavity.  EXPERIMENTAL THERMAL AND FLUID SCIENCE.  28:23-35.

Laser Doppler anemometry measurements of laminar flow in helical pipes.  EXPERIMENTAL THERMAL AND FLUID SCIENCE.  27:855-865.

Combined turbulent forced convection and thermal radiation in a curved pipe with uniform wall temperature.  NUMERICAL HEAT TRANSFER PART A-APPLICATIONS.  44:149-167.

Condensation heat transfer of R-134a flow inside helical pipes at different orientations.  INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER.  30:745-754.

Numerical investigations of liquid-solid slurry flows in a fully developed turbulent flow region.  INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW.  24:389-398.

TED-AJ03-588 CONDENSATION HEAT TRANSFER AND PRESSURE DROP OF REFRIGERANT R-134A IN A HORIZONTAL ANNULAR HELICOIDAL PIPE

TED-AJ03-589 EFFECT OF PARTICLE SIZE DISTRIBUTION ON PIPELINE FLOW OF SOLID-LIQUID SLURRY

Evolution of convection pattern during the solidification process of a binary mixture: effect of initial solutal concentration.  INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER.  45:5191-5200.

Buoyancy effect on developing turbulent flow and heat transfer in a helical pipe with finite pitch

Experimental and numerical investigation of air-particle two-phase flow in centrifugal separator

Experimental investigation of condensation heat transfer of refrigerant R-134A in helicoidal pipes

Condensation of R134a flowing inside helicoidal pipe.  INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER.  43:2553-2564.

Combined laminar forced convection and thermal radiation in a helical pipe.  INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER.  43:1067-1078.

Study of double-diffusive velocity during the solidification process using particle image velocimetry.  INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER.  42:4427-4445.

Vortex flow of low concentration NH4Cl-H2O solution during the solidification process.  INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER.  42:4153-4163.

Turbulent heat transfer to near-critical water in a heated curved pipe under the conditions of mixed convection.  INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER.  42:3147-3158.

The effects of inlet turbulence on the development of fluid flow and heat transfer in a helically coiled pipe.  INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER.  42:739-751.

Turbulent mixed convective heat transfer in the entrance region of a curved pipe with uniform wall-temperature.  INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER.  41:3793-3805.

Developing turbulent convective heat transfer in helical pipes.  INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER.  40:3861-3873.

Laminar forced convection in the entrance region of helical pipes.  INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER.  40:3293-3304.

Developing turbulent convective heat transfer in helical pipes

Turbulent developing fluid flow in helical pipes

Experimental investigation of the laminar flow heat transfer enhancement in a small-scale square duct with aqueous carbopol solutions.  JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME.  118:555-561.

Laminar heat transfer in square duct flow of aqueous CMC solutions.  INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER.  39:503-510.

EFFECTS OF SURFACE RADIATION ON TURBULENT FREE-CONVECTION IN AN OPEN-ENDED CAVITY.  INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER.  21:117-129.

3 BEM SCHEMES FOR THE CALCULATING OF SUBSONIC COMPRESSIBLE PLANE CASCADE FLOW.  ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS.  11:25-32.

Turbulent mixed convection-radiation interactions in a cavity

Study of grown-in defects and effect of thermal annealing in Al0.3Ga0.7As and GaAs LPE layers.  JOURNAL OF ELECTRONIC MATERIALS.  11:273-287.

EFFECTS OF TEMPERATURE AND CONCENTRATION ON THE STEADY SHEAR PROPERTIES OF AQUEOUS-SOLUTIONS OF CARBOPOL AND CMC.  INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER.  22:157-166.

Heat Release in Turbine Cooling I: Experimental and Computational Comparison of Three Geometries

Heat Release in Turbine Cooling II: Numerical Details of Secondary Combustion Surrounding Shaped Holes

Verification and validation of NASA LEWICE 2.2 icing software code.  JOURNAL OF AIRCRAFT.  43:1253-1258.

Numerical study of laminar mixed convection in the entrance region of a helical pipe with uniform wall temperature.  1033-1036.

An Affordable PIV Technique for Water Using Potato Starch with Diode Laser and Smartphones.  390-399.

CFD Modeling of Storm Sewer Geysers in Partially Filled Dropshafts.  1187-1195.

Lean Blowout Limit Prediction for Combustion in a Swirler by a New Indicator-Assisted RANS Approach

STEADY STATE MULTIPHASE MODELING OF HEAT AND MASS TRANSFER INSIDE TRANSPORT MEMBRANE CONDENSER.  671-682.

UNDERSTANDING THE INFLUENCE OF PRESSURE DISTURBANCE ON THE TRANSITION OF STRATIFIED TO SLUG FLOW.  947-957.

A NEW TILE MODEL FOR AIR FLOW DISTRIBUTION IN A FULL-FEATURED DATA CENTER WITH RAISED FLOOR PLENUM.  510-517.

A NUMERICAL SENSITIVITY STUDY OF MODELING PARAMETERS IN THE COMBUSTION OF A SWIRLER

An investigation of the effects of volume fraction on drag coefficient of non-spherical particles using PR-DNS

Deep Learning For Drag Coefficient Predictions Of Spherical And Non-Spherical Particles

HEAT AND MASS TRANSFER IN CROSS FLOW TRANSPORT MEMBRANE CONDENSER BASED HEAT EXCHANGER: A COMPUTATIONAL PARAMETRIC STUDY.  949-958.

INFLUENCE OF FLUE GAS TURBULENCE INTENSITY ON THE HEAT AND MASS TRANSFER AND PRESSURE DROP INSIDE A TMC BASED HEAT EXCHANGER

A Comprehensive CFD Study of Tile Flow Rate Distribution in a Compact Data Center Laboratory.  374-382.

Numerical simulation of heat, air, and moisture transfer through a wall of porous media

AN EVALUATION OF THE EFFECTS OF TEAM PROJECTS AND AUGMENTED REALITY ON STUDENT LEARNING IN SUSTAINABLE BUILDING SCIENCE

Air Flow Velocity Field Validation and Turbulence Studies on a Single Rack Model in Data Centers

BOREHOLE TEMPERATURE MODELLING IN HIGH TEMPERATURE DRILLING ENVIRONMENT BASED ON HEAT TRANSFER LAWS

Computational simulation and analysis of major control parameters of time-dependent PV/T collectors

EFFECT OF RACK MODELS AND BUOYANCY FORCES ON A SMALL DATA CENTER FACILITY

LEARNING IN A MULTIDISCIPLINARY ENVIRONMENT: DESIGN OF THERMAL/FLUIDS SYSTEMS IN BUILDINGS

Performance Evaluation of Liquid 3D Chip Cooling Systems under Non-uniform Power Density: Effects of Inlet and Plenum Configurations.  1260-1265.

VALIDATION AND EVALUATION OF TURBULENCE MODELS IN THERMAL PREDICTIONS OF A SMALL DATA CENTER FACILITY

A DNS STUDY OF FALLING DROPLETS UNDER EFFECTS OF ELECTRIC FIELD

CFD model validation of the turbulent flows in plate-inserted pipes for a ground-air heat exchanger application.  51-60.

Near Wall Deformation and Dynamics of Falling Droplets under the Effect of Electric Field

Numerical modeling and performance evaluation of multi-pass solar air heater.  1591-1598.

OFF-DESIGN MODELING OF SHELL AND TUBE TRANSPORT MEMBRANE CONDENSER HEAT EXCHANGERS

Design and development of a PV-T test bench based on Arduino.  2013 ISES SOLAR WORLD CONGRESS. 71-75.

Improving Cooling Efficiency by Using Mixed Tiles to Control Airflow Uniformity of Perforated Tiles in a Data Center Model

MODELLING OF SHELL AND TUBE TRANSPORT MEMBRANE CONDENSER HEAT EXCHANGERS IN LOW GRADE WASTE HEAT AND WATER RECOVERY APPLICATIONS

Multi-objective Optimization of a Data Center Modeling Using Response Surface

NUMERICAL STUDY OF TRANSPORT MEMBRANE CONDENSER HEAT EXCHANGERS

PERFORMANCE EVALUATION OF MULTI-STAGE SHELL AND TUBE TRANSPORT MEMBRANE CONDENSER HEAT EXCHANGERS FOR LOW GRADE WASTE HEAT AND WATER RECOVERY

Surface Geometry Optimization for Convection Flow over Super Hydrophobic Surfaces

Modelling of Shell and Tube Transport Membrane Condenser Heat Exchangers in Low Grade Waste Heat and Water Recovery Applications.  v008t10a011-v008t10a011.

Multi-Objective Optimization of a Data Center Modeling Using Response Surface.  v008t10a044-v008t10a044.

Numerical Study of Transport Membrane Condenser Heat Exchangers.  v008t10a061-v008t10a061.

A Hybrid Turbulence Model Coupling Strategy for CFD Simulation of a Data Center Model

CONTROL OF TURBULENT COMBUSTION FLOW INSIDE A GAS TURBINE COMBUSTION CHAMBER USING PLASMA ACTUATORS

Data Center Modeling Using Response Surface with Multi-Parameters Approach

Decreasing the Primary Energy Demand in the Plastics Industry by Modifying and Linking Energy Flows

NUMERICAL INVESTIGATION OF HEAT TRANSFER AND CONDENSATION RATE IN TWO-STAGE TRANSPORT MEMBRANE CONDENSER HEAT EXCHANGER UNITS

NUMERICAL INVESTIGATION OF MICRO-CHANNELED LOUVER FIN ALUMINUM HEAT EXCHANGERS AT LOW REYNOLDS NUMBER

NUMERICAL MODELING OF INDUSTRIAL SCALE TRANSPORT MEMBRANE CONDENSER BASED HEAT EXCHANGERS FOR FLUE GAS WASTE HEAT AND WATER RECOVERY

NUMERICAL SIMULATION OF LOW GRADE HEAT AND WATER RECOVERY USING NANOPOROUS TRANSPORT MEMBRANE CONDENSERS BUNDLE TUBES

Control of Turbulent Combustion Flow Inside a Gas Turbine Combustion Chamber Using Plasma Actuators.  v001t03a011-v001t03a011.

Numerical Simulation of Low Grade Heat and Water Recovery Using Nanoporous Transport Membrane Condensers Bundle Tubes.  v001t02a003-v001t02a003.

A COMPUTATIONAL MODEL FOR PERFORMANCE PREDICTION OF A HYBRID PV/T MODULE

CFD simulation of velocity and void fraction distribution of two-phase flows (AIR-Water) in vertical helical coils.  1751-1765.

Computational models for performance prediction of a hybrid PV/T module.  603-615.

LOCALIZED CLIMATISATION OF PERISHABLE PRODUCTS - SOLUTIONS FOR INCREASING ENERGY EFFICIENCY

NUMERICAL SIMULATION AND PARAMETRIC ANALYSIS OF MULTISTAGE IONIC WIND PUMP FOR ENHANCED AIR-COOLING

Natural Ventilation of a Solar House in Hot and Humid Climate - A Study Using Building Energy Simulation Method

Reduced order modeling of a data center with multiparameters in a 3d approach.  473-484.

UNCERTAINTY ANALYSIS IN LOUVER FIN ALUMINUM HEAT EXCHANGERS

A Multi-Zone Building Energy Simulation of a Data Center Model with Hot and Cold Aisles

A Parametric Study of Temperature and Volumetric Flow Rate Parameters of a Data Center Using Multi-Zone Building Energy Simulation

CFD MODELING OF PRESSURE COEFFICIENTS FOR A NATURAL VENTILATION STUDY IN AN EXPERIMENTAL LOW RISE BUILDING

COMPARISON OF MIXED AND STRATIFIED VENTILATION SYSTEMS IN PRODUCTION AREAS - EXPERIMENTAL AND SIMULATION STUDIES

Length of the entrance and hydraulic characteristics of bubbly flows in helical coils

Numerical simulation,parametric study and optimization of thermoelectric generators for self-cooling of devices

Secondary reactions of turbulent reacting flows over a film-cooled surface using OpenFOAM

Steady state simulation of gaseous combustor using local extiction eddy dissipation concept

The effect of step length and inclined angle of backward-facing step on heat transfer characteristics

Maximizing the detection probability of overheating server components with sensor placement based on thermal dynamics.  SUSTAINABLE COMPUTING-INFORMATICS & SYSTEMS. 148-160.

A Numerical Investigation of Internal and External Two-Phase Flows of a Rotating Disk Atomizer.  1337-1350.

Leveraging Thermal Dynamics in Sensor Placement for Overheating Server Component Detection

NANOPOROUS MEMBRANE TUBE CONDENSING HEAT TRANSFER ENHANCEMENT STUDY.  827-833.

Numerical Modeling and Simulation of Condensation Heat Transfer in a Bundle of Transport Membrane Tubes for Waste Heat and Water Recovery.  501-+.

Towards Optimal Sensor Placement for Hot Server Detection in Data Centers.  2014 IEEE 34TH INTERNATIONAL CONFERENCE ON DISTRIBUTED COMPUTING SYSTEMS (ICDCS 2014). 899-908.

Design studies of turbine blade film cooling with unburned fuel in cross stream flow

Numerical simulation of film cooling in reactive flow over a surface with shaped coolant hole

Room-temperature nanocatalytic reaction modeling and its applications in direct energy conversion.  CARBON ELECTRONICS: INTERFACES TO METALS, DIELECTRICS, AND ELECTROLYTES. 61-71.

A COMPUTATIONAL STUDY OF CATALYTIC PLATINUM NANOPARTICLES WITH AND WITHOUT OH CHEMISORPTION DURING REACTIONS.  15-22.

NUMERICAL SIMULATION OF REACTIVE TURBULENT FLOWS OVER BLUFF BODY FLAME HOLDERS: A PARAMETRIC STUDY.  129-143.

Inter-Turbine Burner (ITB) Performance for Circumferential Cavity Volume Variations for Cold and Heated Fuel Injection

Numerical Simulation of Inter-Turbine Burner (ITB) Flows with the Inclusion of V-Gutter Flame Holders.  2243-2255.

PREDICTION OF INTER-TURBINE BURNER (ITB) PERFORMANCE WITH CURVED RADIAL VANE CAVITY AT VARIOUS EQUIVALENCE RATIOS.  2131-2139.

Verification and validation studies for a piloted methane-air jet flame.  709-715.

Verification and validation studies for a piloted methane-air jet flame.  709-715.

Laser-Induced incandescence for soot volume fraction measurements in steady and pulsed ethylene/air non-premixed flames.  2443-2452.

Numerical modeling of solids precipitation of a binary mixture flowing in a horizontal pipeline.  263-270.

Effects of aspect ratio on compressible gas flow in microchannels.  1929-1937.

Three-dimensional compressible gas flow in microchannnels.  17127-17135.

Verification and validation studies for laminar hypersonic flow over a blunted cone and a flat plate

Experimental Investigation of Heat Transfer in a Microchannel with Vortex-Generators

Numerical Study of Liquid Flow and Heat Transfer in a Microchannel with In-Line Array of bars

Navier-Stokes Modeling of Gas Flows in a De-Laval Micronozzle

Effect of gas/liquid mass ratio on the penetration of aerated liquid jet in supersonic cross flow.  16209-16216.

NUMERICAL MODELING AND ANALYSIS OF DRAINAGE PATTERNS OF SALTCAKE IN A COLUMN.  367-374.

Numerical study of axisymmetric gas flow in conical micronozzles by DSMC and continuum methods.  11857-11866.

VERIFICATION AND VALIDATION STUDIES FOR LAMINAR HYPERSONIC FLOW OVER A BLUNTED CONE AND A FLAT PLATE.  351-356.

Verification and validation studies for a laminar non-premixed methane/air flame

Density ratio and turbulence intensity effects in microbubble drag reduction phenomenon.  181-186.

Effect of jet pulsing on the mixing of non newtonian fluid in storage tank.  4075-4077.

Gas flow in microchannels: An experimental study.  595-599.

Validation of LEWICE 2.2 icing software code: Comparison with LEWICE 2.0 and experimental data.  15135-15143.

Visualization of pulsed aerated liquid jet in supersonic cross flow.  643-649.

Characterization of aerated liquid jet in subsonic and supersonic cross flow

Continuum modeling of gas flows in micronozzles.  399-404.

Density ratio and turbulence intensity effects in microbubble drag reduction phenomenon.  17-22.

Experimental study of liquid flow and heat transfer in microchannels with in-line array of cubes.  861-864.

Experimental study of liquid flow and heat transfer in microchannels with in-line array of cubes.  2385-2388.

Gas flow in microchannels: An experimental study.  179-183.

Numerical modeling of gas flow in square microchannels.  405-409.

Numerical modeling of solidification process using the enthalpy-porosity technique.  401-407.

Penetration of aerated liquid fuel jet in supersonic cross flow.  9-14.

Verification and validation of CFD simulation of pulsating laminar flow in a straight pipe

Visualization of pulsed aerated liquid jet in supersonic cross flow.  847-853.

Effect of boundary conditions and initial concentartions on the solidfication of binary mixture in trapezoidal cavity.  575-580.

Experimental investigation of condensation heat transfer in annular helicoidal pipes at different orientations.  121-127.

Experimental investigation of fluid flow and phase moving interface during the solidification of binary mixture in trapezoidal cavity.  1009-1014.

Pressure drop study and correlation development for two-phase flow of R134A in annular helicoidal pipe.  671-676.

Characterization of convection patterns during the solidification process using particle image velocimetry.  157-160.

Condensation heat transfer and pressure drop of R-134A flowing in annular helical pipes at different orientations.  429-434.

Numerical investigation of oxygen-enriched pulverized coal combustion.  57-62.

Soot particle measurements in steady and unsteady laminar diffusion flames using laser-induced incandescence.  63-69.

Condensation Heat Transfer and Pressure Drops of Refrigerant R-134a in Annular Helicoidal Pipes.  6.

Effect of particle size on pipeline flow of solid-liquid slurry with fixed particle size distribution.  103-108.

Numerical investigations of double-species slurry flow in a straight pipe entrance.  145-154.

Numerical simulation of turbulent heat transfer to near-critical water in a curved pipe.  137-144.

Combined turbulent forced convection and thermal radiation in a curved pipe with uniform wall temperature.  1627-1636.

Flow visualization study of convection during the solidification process of a binary mixture.  1131-1142.

Transport characteristics of a multi-species slurry in a horizontal pipeline.  259-263.

Buoyancy effect on developing turbulent flow and heat transfer in a helical pipe with finite pitch.  235-242.

Experimental and numerical investigation of air-particle two-phase flow in centrifugal separator.  205-211.

Experimental investigation of condensation heat transfer of refrigerant R-134A in helicoidal pipes.  95-101.

CONDENSATION OF R134a FLOWING INSIDE HORIZONTAL AND VERTICAL HELICOIDAL PIPE.  29-35.

EXPERIMENTAL STUDY ON THE HYDRAULIC CHARACTERISTICS OF SOLID-LIQUID SLURRY TWO-PHASE FLOW IN HORIZONTAL PIPELINES.  77-82.

LAMINAR MIXED CONVECTION IN THE ENTRANCE REGION OF A HELICAL PIPE.  153-160.

THE INFLUENCE OF BOUNDARY CONDITION ON SOLIDIFICATION OF BINARY SOLUTION IN RECTANGULAR CAVITY.  185-190.

Combined laminar forced convection and thermal radiation in a curved pipe.  73-78.

TURBULENT HEAT TRANSFER TO NEAR-CRITICAL WATER IN A HEATED CURVED PIPE UNDER THE CONDITIONS OF MIXED CONVECTION.  101-108.

Turbulent mixed convective heat transfer in the entrance region of a helical pipe with uniform wall temperature.  311-316.

TURBULENT CONVECTION WITH AND WITHOUT THERMAL RADIATION IN A BACK HEATED OPEN CAVITY SWEPT BY AN EXTERNAL FORCED FLOW.  99-104.

Transient turbulent free convection in an open cavity.  515-521.

A NUMERICAL STUDY OF THE TURBULENT NATURAL-CONVECTION IN COMPRESSIBLE FLUID WITH VARIABLE PROPERTIES IN AN OPEN SQUARE CAVITY.  783-795.

Special Issue: Advances in Nanofluids: Modeling and Applications (ANMA).  JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS.

Heat transfer in the new millennium - Views by members of the ASME heat transfer division.  JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME. 2-6.

Numerical Simulation of Indoor Living Wall Effects Using an Evapotranspiration Model in Hygroscopic Porous Medium

DOUBLE DIFFUSIVE VELOCITY MEASUREMENT DURING THE SOLIDIFICATION PROCESS USING PARTICLE IMAGE VELOCIMETRY.  111-118.

THE EFFECTS OF INLET TURBULENCE ON THE DEVELOPMENT OF FLUID FLOW AND HEAT TRANSFER IN A HELICALLY COILED PIPE.  63-69.

Review of Artificial Intelligence Training Tools and Courses for Radiologists..  ACADEMIC RADIOLOGY. 1238-1252.

A review of PV-T systems: Thermal management and efficiency with single phase cooling.  INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER. 861-871.

A review of PV/T technologies: Effects of control parameters.  INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER. 483-500.

A Review of High-Heat-Flux Heat Removal Technologies.  JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME.