Optimization of multistage turbines using a through-flow code
Article
Petrovic, MV, Dulikravich, GS, Martin, TJ. (2001). Optimization of multistage turbines using a through-flow code
. 215(5), 559-569. 10.1243/0957650011538802
Petrovic, MV, Dulikravich, GS, Martin, TJ. (2001). Optimization of multistage turbines using a through-flow code
. 215(5), 559-569. 10.1243/0957650011538802
Fast and accurate flow calculation and performance prediction of multistage axial flow turbines at design and off-design conditions were performed using a compressible steady state inviscid through-flow code with high fidelity loss and mixing models. The code is based on a stream function model and a finite element solution procedure. A new design system has been developed which optimizes hub and shroud geometry and inlet and exit flow field parameters for each blade row of a multistage axial flow turbine. Optimization was performed using a hybrid constrained optimization code that switches among the modules automatically in order to avoid local minima and to accelerate design convergence rate. By automatically varying a relatively small number of geometric variables per turbine stage it is possible to find an optimal radial distribution of flow parameters at the inlet and outlet of every blade row. Thus, an optimized meridional flow path can be found that is defined by the optimized shape of the hub and shroud while keeping blade shapes intact. The multistage design optimization system has been demonstrated using an actual two-stage axial gas turbine as an example. The comparison of computed performance of an already very high efficiency initial design and its optimized design demonstrates more than 1 per cent improvement in the turbine efficiency at design and significant off-design conditions. The entire design optimization process is feasible on a typical single-processor computer workstation or a personal computer.
