Dynamic fracture of a beam or plate under tensile loading Article

Levy, C, Herrmann, G. (1983). Dynamic fracture of a beam or plate under tensile loading . Engineering Fracture Mechanics, 17(2), 125-131. 10.1016/0013-7944(83)90164-9

cited authors

  • Levy, C; Herrmann, G

abstract

  • The dynamic fracture response of a long beam of brittle elastic material under tensile loading is studied. If the magnitude of the applied loading is increased to a critical value, a crack is assumed to propagate across the beam cross section. In a parallel analysis to [t] the crack length and applied loading at the fracture face are determined as functions of time measured from fracture initiation. The results of the analysis are shown in graphs of crack length, crack tip speed and fracturing section tensile loading vs time. As found in [1], the crack tip accelerates very quickly to a speed near the characteristic terminal speed for the material, travels at this speed through most of the beam thickness, and then decelerates rapidly in the final stage of the process. Finally, by appropriate change of the elastic modulus, the results may be applied to plane strain fracture of a plate under pure tensile loading. © 1983.

authors

publication date

  • January 1, 1983

published in

Digital Object Identifier (DOI)

start page

  • 125

end page

  • 131

volume

  • 17

issue

  • 2