Journal of Bridge Engineering

Edit Your Profile

Journal of Bridge Engineering Journal

publication venue for

UHPC Connection Details for Simple for Dead Load and Continuous for Live Load Steel Bridges in Nonseismic Areas. 29. 2024
Self-Stressing Composite Steel Bridge Girder System. 27. 2022
Joint Design Optimization for Accelerated Construction of Slab Beam Bridges. 25. 2020
Investigation of a Detail for Connecting Precast Columns to Precast Cap Beams Using Ultrahigh-Performance Concrete. 25. 2020
Retrofitting of Bridge Columns Using UHPC. 24. 2019
Seismic Performance of a New Connection Detail in an SDCL Steel Bridge System. 24. 2019
Seismic Performance of Precast, Pretensioned, and Cast-in-Place Bridges: Shake Table Test Comparison. 21. 2016
Nontraditional Shear Failures in Bulb-T Prestressed Concrete Bridge Girders. 21. 2016
Shaking Table Performance of a New Bridge System with Pretensioned Rocking Columns. 21. 2016
Flexible Pile Head in Jointless Bridges: Design Provisions for H-Piles in Cohesive Soils. 21. 2016
Experimental Evaluation of High-Performance Sliding Surfaces for Bridge Bearings. 21. 2016
Experimental Study of Seamless Bridge Transition System for US Practice. 21. 2016
Predicting the Service Life of Sliding Surfaces in Bridge Bearings. 21. 2016
Proposed Design Provisions for a Seamless Bridge System: Cases of Flexible and Jointed Pavements. 21. 2016
Flexible Pile Head in Jointless Bridges: Experimental Investigation. 20. 2015
Studies of In-Plane Ultimate Loads of the Steel Truss Web-RC Composite Arch. 19. 2014
Effect of Concrete Slab on Shear Capacity of Composite Plate Girders under Positive Moment. 18:89-98. 2013
Lateral Load Distribution in Curved Steel I-Girder Bridges. 10:281-290. 2005
Full-scale testing of composite plate girders constructed using 485-MPa high-performance steel. 6:598-604. 2001
Statewide vessel collision design for bridges. 6:213-220. 2001
Design of mechanical viscous dampers for stay cables. 5:114-123. 2000
Dynamic behavior of continuous and cantilever thin-walled box girder bridges. 1:67-75. 1996
Equivalent Beam-Column Method to Estimate In-Plane Critical Loads of Parabolic Fixed Steel Arches. 14:346-354.
Evaluation, Rehabilitation Planning, and Stay-Cable Replacement Design for the Hale Boggs Bridge in Luling, Louisiana. 15:364-372.
High Performance Steel: Research Front-Historical Account of Research Activities. 9:212-217.
Improved Moment Strength Prediction of Composite Steel Plate Girders in Positive Bending. 10:28-38.
Performance-Based Design of Drilled Shaft Bridge Foundations. 16:749-758.
Seismic performance of concrete-filled FRP tube columns for bridge substructure. 11:359-370.
Shear capacity of hybrid plate girders. 12:535-543.
Truck Loading and Fatigue Damage Analysis for Girder Bridges Based on Weigh-in-Motion Data. 10:12-20.
In-service evaluation of cable-stayed bridges, overview of available methods, and findings
Discussion of "Evaluation of Pretensioned Girders with Partial-Strand Debonding" by Mathew W. Bolduc, Avdhesh Gaur, Bahram M. Shahrooz, Kent A. Harries, Richard A. Miller, and Henry G. Russell 2021
Accelerated Bridge Construction 2020

International Standard Serial Number (ISSN)

1084-0702

Electronic International Standard Serial Number (EISSN)

1943-5592