JOURNAL OF POWER SOURCES

Edit Your Profile

JOURNAL OF POWER SOURCES Journal

publication venue for

Hierarchical porous N-doped carbon-supported PtCu nanoparticles as an efficient catalyst for oxygen reduction reaction. 533. 2022
In-situ exfoliation and integration of vertically aligned graphene for high-frequency response on-chip microsupercapacitors. 516. 2021
A high-energy aqueous on-chip lithium-ion capacitor based on interdigital 3D carbon microelectrode arrays. 455. 2020
Performance and stability of large planar solid oxide fuel cells using phosphine contaminated hydrogen fuel. 395:185-194. 2018
Poisoning of Ni-Based anode for proton conducting SOFC by H₂S, CO₂, and H₂O as fuel contaminants. 378:255-263. 2018
Studies on intrinsic phase-dependent electrochemical properties of MnS nanocrystals as anodes for lithium-ion batteries. 338:9-16. 2017
Hierarchical NiCo₂O₄@nickel-sulfide nanoplate arrays for high performance supercapacitors. 276:19-25. 2015
Facile synthesis of silicon films by photosintering as anode materials for lithium-ion batteries. 214:21-27. 2012
Enhanced electrochemical performance of porous NiO-Ni nanocomposite anode for lithium ion batteries. 196:9625-9630. 2011
Heat treatment effect of the Ni foam current collector in lithium ion batteries. 196:8742-8746. 2011
Electrochemically activated carbon micro-electrode arrays for electrochemical micro-capacitors. 196:2403-2409. 2011
Optimizing the mass transport phenomenon around micro-electrodes of an enzymatic biofuel cell inside a blood artery via finite element analysis method. 195:4685-4694. 2010
Evaluation of silver as a miniature direct methanol full cell electrode. 195:46-53. 2010
Assessing the catalyst processing for low temperature cofired ceramic-based direct methanol fuel cells. 189:935-942. 2009
Semi-analytical proton exchange membrane fuel cell modeling. 183:164-173. 2008
Comparison of microchannel dimensions for air-breathing polymer exchange membrane microfuel cells. 182:603-608. 2008
Fabrication and properties of a carbon/polypyrrole three-dimensional microbattery. 178:795-800. 2008
Synthesis and electrochemical performance of doped LiCoO₂ materials. 174:828-831. 2007
Influence of cell voltage and current on sulfur poisoning behavior of solid oxide fuel cells. 172:688-693. 2007
A dynamic 1D model of a solid oxide fuel cell for real time simulation. 171:634-643. 2007
Analytical correlations for intermediate temperature PEM fuel cells. 160:299-304. 2006
Three dimensional modeling of high temperature PEM fuel cells. 160:215-223. 2006
Identification of nickel sulfides on Ni-YSZ cermet exposed to H₂ fuel containing H₂S using Raman spectroscopy. 156:461-465. 2006
Parametric model of an intermediate temperature PEMFC. 156:414-423. 2006
Review and comparison of approaches to proton exchange membrane fuel cell modeling. 147:72-84. 2005
Analysis of an energy recovery system for reformate-based PEM fuel cells involving a binary two-phase mixture. 141:258-264. 2005
A solid oxide fuel cell operating on hydrogen sulfide (H₂S) and sulfur-containing fuels. 135:17-24. 2004
A passive fuel delivery system for portable direct methanol fuel cells. 132:86-91. 2004
Performance evaluation of an energy recovery system for fuel reforming of PEM fuel cell power plants. 109:287-293. 2002
A review of application of carbon nanotubes for lithium ion battery anode material 2012

category

CHEMISTRY, PHYSICAL Category
ELECTROCHEMISTRY Category
ENERGY & FUELS Category
MATERIALS SCIENCE, MULTIDISCIPLINARY Category

International Standard Serial Number (ISSN)

0378-7753

Electronic International Standard Serial Number (EISSN)

1873-2755

journal abbreviation

J POWER SOURCES